Discontinued
EOC-300-POE

EOC-300-POE

  • IP extender coaxial cable | PoE
  • Passive
  • Transmitter and receiver
  • Allows transmission 1 IP channel
  • Maximum distance 300 m (up to 500 m with DIP switch)
  • Bandwidth up to 100 Mbps
  • Description
  • Specifications
  • Contents
  • Downloads

IP PoE passive extender over coaxial cable.

Pair of extension devices with luminous state indicators that allow to transmit an IP channel and also power supply through coaxial cable, to make the installation of a new IP camera possible by reusing the cabling of an already existing analog camera.

Each extender/transceiver has an RJ45 Ethernet connection and a BNC connector for the coaxial cable which is the physical medium for the transmission.

The maximum distance between transceivers is 300M. The transmission rate allowed by the system is 100 Mbps, with the possibility of downloading it to 10 Mbps to reach a distance of 500 meters (accepting a reduction of the power supply transmitted to the camera). Both devices are passive and therefore do not require their own power supply.

Connection over coaxial BNC male/female connector
Power Not required
PoE IEEE802.3, IEEE 802.3u, IEEE 802.3af, 802.3at standard;
Datarate 10/100 Mbps with DIP switch
Distance over coaxial 300 m between extenders (500 m in case of transmission rate of 10 Mbps)
Ethernet connection Port RJ45
Ethernet signal 10/100Mbps Base-T
Status indicators Yellow: power OK | Green: data connection OK | Green flashing: Data transmission OK
Transmitted PoE Power 15.2 W to 300 meters of coaxial cable, 10.3 W to 500 meters of coaxial cable
Protection Overvoltages up to 4 kV second IEC61000-4-5
Operating conditions 0℃~40℃ Temperature | 95% Humidity
Dimensions 29 (H) x 45 (W) x 113 (D) mm / 58 g
  • Pair of transceivers
  • Manual

alt