Discontinued
EOC-300

EOC-300

  • IP extender via coaxial cable
  • Active | Requires 9-36 V DC
  • Transmitter and receiver
  • Allows transmission 1 IP channel
  • Maximum distance 300 m (up to 500 m with DIP switch)
  • Bandwidth up to 100 Mbps
  • Description
  • Specifications
  • Contents
  • Downloads

Active IP extender over coaxial cable.

Pair of extension devices with luminous status indicators that allow to transmit an IP channel through coaxial cable, which makes it possible to install a new IP camera by reusing the cabling of an existing analogue camera.

Each extender/transceiver has an RJ45 Ethernet connection and a BNC connector for the coaxial cable which is the physical medium for the transmission.

The maximum distance between transceivers is 300M. The transmission rate allowed by the system is 100 Mbps, with the possibility of downloading it to 10 Mbps to reach a distance of 500 meters. Both devices are active and therefore require power.

Connection over coaxialBNC male/female connector
PowerDC Active 9-36 V
Datarate10/100 Mbps with DIP switch
Distance over coaxial300 m between extenders (500 m in case of transmission rate of 10 Mbps)
Ethernet connectionPort RJ45
Ethernet signal10/100Mbps Base-T
Status indicatorsYellow: power OK | Green: data connection OK | Green flashing: Data transmission OK
ProtectionOvervoltages up to 4 kV second IEC61000-4-5
Operating conditions-10℃~55℃ Temperature | 95% Humidity
Dimensions29 (H) x 45 (W) x 113 (D) mm / 58 g
  • Pair of transceivers
  • Manual

alt